Use printer menus
Menu item
Print Page Borders
Off*
On
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Offset Pages
None*
Between Copies
Between Jobs
Staple
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
4 staples
Punch
Off*
2 holes
3 holes
4 holes
"Copy from" Size
[List of paper sizes]
"Copy to" Source
Tray [x] (1*)
Multipurpose Feeder
Auto Size Match
Temperature
‑4 to 4 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Place a border around each image when printing multiple pages on a single
page.
Print multiple copies in sequence.
Offset the output of each print job or each copy of a print job.
Notes:
•
Between Copies offsets each copy of a print job if Collate is set to On
[1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages
is offset, such as all page 1s and all page 2s.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu item appears only when a staple, hole punch finisher is
installed.
Specify the staple position for all print jobs.
Note: This menu item appears only when a finisher is installed.
Punch holes on the printed output.
Note: This menu item appears only when a staple, hole punch finisher is
installed.
Set the paper size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Specify the paper source for the copy job.
Specify whether to generate a cooler or warmer output.
234