Basic Dimensions Of The Router Box; Mounting Recommendations - Advantech SmartFlex SR300 User Manual

5.4 Basic dimensions of the router box

5.5 Mounting recommendations

Possibility to be put on a work surface,
DIN rail EN 60715 with included plastic or metal clip.
For the most of applications with a built-in router in a switch board it is possible to recognize
two kinds of environments:
no public and industry environment of low voltage with high interference,
public environment of low voltage without high interference.
For both of these environments, it is possible to mount router to a switch board, the follow-
ing there is no need to have examination immunity or issues in connection with EMC according
to EN 60439-1 ed.2:00 + A1:04.
Compliance of EN 60439-1 ed.2:00 + A1:04 specification it is necessary to observe next
assembly of the router to the switch – board:
For every cables we recommend to bind the bunch, we recommend for this use:
– Length of the bunch (the combination of power supply and data cables) can be
maximum 1.5 m. If the length of data cables exceeds 1.5 m or in the event of,
the cable leads towards the switch – board. We recommend installing over – voltage
protectors (surge suppressors).
– With data cables they mustn't carry cables with reticular tension
Sufficient space must be left before individual connectors for handling of cables,
For correct function of the router we recommend to use in the switch-board earth-bonding
distribution frame for grounding of power supply of router, data cables and antenna.
Figure 7: Basic dimensions of the router box
11
SmartFlex SR300
230 V/50 Hz.