Page 3
This manual, covering various aspects of the equipment such as installation and setup, which will help you make full use of this LCD Drawer. Please read this manual carefully, install and operate the equipment according to the manual to avoid damage. Product package includes following items: 1 * Triple screen LCD drawer;...
When operating, mouse can simly across each screen boundary. Function & Features LCD2U17-3H-01 is 2U height, supported resolution up to 1920 x 1200 , 75Hz. It can be installed into19 inch rack cabinet . No need to install additional software or hardware.
1.4 Product Specifications Model LCD2U17-3H-01 Brightness 300cd/m2 Contrast 650:1 Angle of visibility 140°(H),120°(V) Color display 262K Video resolution native 1920 x 1080 (support up to 1920 x 1200) Keyboard 104 keys touch pad mouse Mouse Local Control Keyboard/Mouse USB 2.0...
Front View Part Function Description Handle to adjust screen tilt; lock/release rail sliding LCD display Keyboard Touchpad LCD button to control Screen Display position and LCD OSD button image setting. Mounting bracket Install into rack cabinet Lock button Auto lock / release when lcd pull up and down USB2.0 HUB port - 6 - www.RackmountMart.com...
Rear View Component Component Function Description Function Description AC Power port Standard IEC Type AC Inlet Power Switch Rock switch, turn on/off equipment main power. Audio port For audio function Connect to server or KVM. VGA port Connect to server or KVM. USB port DVI port Connect to server or KVM.
2 Installation 2.1 Rack Installation Front mounting bracket (L&R) Rear mounting bracket (L&R) Step Front View Back View Step ■ ■ Insert the left and right front mounting brackets into Rear mounting bracket, screw M6 *4pcs rear mounting bracket, screw M6 * 4pcs Front View Step Front View...
2.2 Operation Step Step ■ ■ Unlock handle C to release rail locker and slide out Lift up LCD panel ■ Use locker D to stable the rail Step Step ■ ■ Hold Point F to open the right panel Hold Point E to open the left panel Step After operation...
2.3 Standard Installation Please follow the installation drawing and instructions below for standard installation: * Please Shutdown the Power of Equipment Needs to be Connected * Please Pay Attention to Earthing of Equipment The standard installation is completed, and LCD KVM console can be powered on. Then power on connected hosts.
2.4 LCD OSD Menu Setup OSD Control buttons LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as follows: Button Functions POWER Turn on or off the LCD Display Activate OSD menu, select a menu and press MENU key to confirm the MENU selection and enter the submenu.
The company reserves the right to modify product speciÞ cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2022 Synergy Global Technology Inc. All rights reserved. - 12 - www.RackmountMart.com...
Need help?
Do you have a question about the LCD2U17-3H-01 and is the answer not in the manual?
Questions and answers