Page 3
This manual, covering various aspects of the equipment such as installation, setup and cascade, will help you make full use of this LCD KVM Drawer. Please read this manual carefully and install and operate the equipment according to the manual to avoid damage to this product its accessories.
1 Introduction 1.1 Overview The LCD integrates keyboard, LCD display and touch pad in a drawer type worktable and provides a convenient space-saving operation mode for KVM switch technology. The cover is an LCD display, while the base is keyboard and touchpad. This console is a control device integrating 17.3”...
1.4 Product Specifications 4K-LCD-console Model Brightness 400cd/m2 Contrast 1000:1 Angle of visibility 178°(H),178°(V) Color display 16.7M Keyboard 104 keys touch pad mouse Mouse Local Control Keyboard/Mouse USB 2.0 Terminal HDMI female connector (HDCP2.2) HDMI2.0 Display port 1.4 Display port female connector (HDCP2.2) USB 2.0 For USB peripheral device Video resolution...
Front View Part Function Description Handle to adjust screen position LCD display Keyboard Touchpad LCD button to control Screen Display position and LCD OSD button image setting. Mounting bracket Install into rack cabinet Lock button Auto lock / release when lcd pull up and down USB2.0 HUB port - 6 -...
Rear View Component Function Description AC Power port Standard IEC Type AC Inlet Power Switch Rock switch, turn on/off equipment main power. Display port Connect to server. Connect to server. HDMI port USB port Connect to server. USB 2.0 For USB peripheral device - 7 -...
2 Installation 2.1 Rack Installation Step 1 Attach the two rear slide rails to the rear vertical mounting rails of the rack cabinet using standard M6 cage nuts and screws ( 3 ) (4pcs). Back VIEW Step 2 Attach the two front slide rails to the front vertical mounting rails of the rack cabinet using standard M6 cage nuts and screws ( 3 )
2.2 Standard Installation Please follow the installation drawing and instructions below for standard installation: * Please Shutdown the Power of Equipment Needs to be Connected * Please Pay Attention to Earthing of Equipment The standard installation is completed, and LCD KVM console can be powered on. Then power on connected hosts.
2.3 LCD OSD Menu Setup OSD Control buttons LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as follows: Button Functions POWER Turn on or off the LCD Display Activate OSD menu, select a menu and press MENU key to confirm the MENU selection and enter the submenu.
The company reserves the right to modify product speciÞ cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2020 Synergy Global Technology Inc. All rights reserved. - 11 -...
Need help?
Do you have a question about the LCD1U17-47 and is the answer not in the manual?
Questions and answers