Kodak EasyShare Printer Dock Plus User Manual page 52

Kodak easyshare printer dock plus: users guide
Table of Contents

Advertisement

Troubleshooting
Transfer button/light
Light status
Light glows steady
green
Light blinks green
Light is off
46
Cause
The printer dock is ready for
transferring pictures.
Pictures are being
transferred to the
computer.
There are no pictures in the
camera, on the card, or on
the PictBridge compatible
device.
The camera is not docked, a
compatible Kodak card
reader or PictBridge
compatible device is not
connected, or a memory
card is not inserted.
The printer dock is not
connected to the computer.
The camera is not properly
seated on the connector.
The printer dock is printing
in standalone mode.
The computer is off.
Action/solution
None required.
None required.
After transferring pictures, the
transfer light continues to blink
green until either the Transfer
button is pressed again or the
connection has timed-out.
None required.
To enable Transfer:
1
Connect printer dock to
computer
(page
2
Take pictures.
3
Dock the camera or connect a
compatible Kodak card reader
(page
14) or PictBridge
compatible device
using a card reader, make sure
a memory card is inserted.
Reseat the camera on the printer
dock
(page
9).
The Transfer button is disabled.
Turn on the computer.
www.kodak.com/go/support
25).
(page
12). If

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyShare Printer Dock Plus and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Printer dock plus - easyshare printer dock

Table of Contents