Kodak EasyShare Printer Dock Plus User Manual page 54

Troubleshooting
Slide Show button/light
Light status
Light glows steady
green
Light blinks green The Slide Show is running.
Light is off
USB device connector light
Light status
Light blinks green Slow blink: the device is
Light is off
48
Cause
The Slide Show feature is available.
The Slide Show feature is not available.
NOTE: The Slide Show feature is only available if a
camera is docked.
Cause
initializing or communicating
with the printer dock.
Fast blink: there is a device or
communication error.
There is no device connected
to the USB device connector
on the printer dock.
The connection between the
printer dock and device is
loose.
A device other than a
compatible Kodak card reader
or PictBridge compatible
device is connected.
Action/solution
None required.
Press the Slide
Show button to
start.
None required.
To cancel the Slide
Show, press
None required. To
run a Slide Show,
see
Action/solution
None required.
Check the USB connections from
the device to the printer dock
(page 15).
Disconnect then reconnect USB
cable from printer dock to device.
None required.
Check the USB connections from
the device to the printer dock
(page 15).
Disconnect the device. Connect a
Kodak 8-in-1 or Kodak 6-in-1 card
reader, or a PictBridge compatible
device.
www.kodak.com/go/support
.
page 21.