Table of Contents
Advertisement
Docking and charging your EasyShare digital
camera
Docking your Kodak EasyShare digital camera lets you review and print
pictures directly from the camera, transfer pictures from the camera to the
computer, and charge the camera battery.
1 Make sure a dock insert is installed on the printer dock (see
dock-rechargeable battery is installed in the camera (see
www.kodak.com/go/support
Setting up your EasyShare digital camera
2 On the camera bottom, find the dock
connector and locator hole.
3 Place the camera on the printer dock, making
sure to align the dock connector and locator
hole with the camera connector and locator
pin. Push down to seat the connector.
Keep the camera wrist strap clear of the paper
path to the front and rear of the printer dock.
The camera is now powered by the printer dock
instead of the camera battery.
■
The Kodak EasyShare Ni-MH rechargeable
battery pack and the Kodak EasyShare Li-Ion
rechargeable battery charge up to 3 hours.
■
The Battery charging lights turn on as
charging progresses. Charging is complete
when all three lights are lit.
You may leave the camera in the printer dock
■
to maintain the charge.
page
2), and a
page
7).
9
Hide quick links:
Advertisement
Table of Contents
