Kodak EasyShare Printer Dock Plus User Manual page 43

If...
Printing stops
during mid-print
(paper stops
feeding, and Paper
light may blink)
Print is smudged
Print is spotted
Print is too light
www.kodak.com/go/support
Try the following
IMPORTANT: Use only Kodak color cartridge & paper kits for
your printer dock. Do not use inkjet paper.
■
Check the paper:
1
Remove the paper tray
2
Check the paper slot on the back of the printer dock.
3
Remove loose paper from the printer dock. If paper is
jammed, see
4
Inspect the paper supply: make sure removable tabs have
not been detached from the paper. Reload with new paper
if necessary.
5
Carefully "fan" the paper to keep the sheets from sticking
together.
6
Reload the paper tray. Do not exceed the fill line.
7
Re-install the paper tray, then press
■
Clean the paper feed roller
■
Fingerprints may be on glossy side of paper. Handle paper by
the edges or by the removable tabs
■
Check to see if the paper is dirty, and use a dry, lint-free cloth
to wipe clean. For excessive dirt or debris, thoroughly clean
the paper tray, and load new paper
NOTE: When storing paper, remove and close the paper tray and paper
tray door to keep dust and debris from collecting on the paper or
inside the printer dock
IMPORTANT: Use only Kodak color cartridge & paper kits for
your printer dock. Do not use inkjet paper.
■
Use the Auto-Enhance button to automatically correct
exposure problems
■
Make sure the paper is loaded with the Kodak logo facing
down. Reload if necessary
■
Try re-taking the picture with the flash off. See your camera
user's guide for details.
■
Adjust the exposure compensation on your camera, and try
re-taking the picture. See your camera user's guide for details.
■
Edit the picture using Kodak EasyShare software on your
computer. See the EasyShare software Help for details.
(page 6).
page 36.
(page 34).
(page 5).
(page 18).
(page 6).
Troubleshooting
to resume printing.
(page 5).
(page 6).
37