Transfer/Communication Problems - Kodak EasyShare Printer Dock Plus User Manual

Transfer/communication problems

If...
Nothing happens
when you try to
transfer pictures to
the computer
www.kodak.com/go/support
Try one or more of the following
■
Press the Transfer button,
■
Check the power and USB connections from the printer dock
to computer (page
■
The camera is not properly seated on connector. Reseat the
camera on the printer dock
■
If you are trying to transfer pictures from a compatible Kodak
card reader (page
(page 29), check the USB connections between the printer
dock and the card reader or device.
NOTE: The Kodak EasyShare printer dock plus is compatible with the
Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each
sold separately). Other Kodak USB card readers may work with
the printer dock plus; however, other manufacturers' card readers
are not supported.
■
Close unnecessary software applications, and minimize
remaining application windows. Follow any messages on the
screen that may have been hidden by other windows.
■
Disconnect then reconnect the USB cable from the printer
dock to the computer
■
Make sure Kodak EasyShare software is installed
Install if necessary. If you choose Custom installation, make
sure to install the printer driver.
■
Uninstall, then reinstall Kodak EasyShare software
■
Make sure your computer meets the minimum system
requirements (page
, on the printer dock.
25).
(page 9).
28) or a PictBridge compatible device
(page 25).
22). Upgrade your system if necessary.
Troubleshooting
(page 22).
(page 22).
41