Printing From A Computer - Kodak EasyShare Printer Dock Plus User Manual

Using the printer dock plus with a computer

Printing from a computer

We recommend using Kodak EasyShare software (included) for printing. This
software lets you take advantage of a wide range of features, including full
color enhancement, red-eye reduction, picture organization, and much more.
If there are no pictures on your computer, use the printer dock to transfer
pictures from your camera or memory card before printing (see
IMPORTANT: Wait until printing is complete before removing paper or the paper
tray. Failure to do so can cause paper misfeeds or jams.
Printing with Kodak EasyShare software
1 Make sure Kodak EasyShare software is installed (see
printer dock is connected to your computer (see
2 Click the My Collection tab.
3 Select the pictures you wish to print.
4 Click the Print at Home tab.
5 Make sure the printer dock is selected as the current printer.
6 Change any other settings, such as paper size and print layout, then click
Print.
NOTE: The Picture Size and Auto-Enhance buttons on the printer dock are disabled when printing
from a computer. Set printing options using EasyShare software.
Printing tagged pictures from your computer
1 Make sure Kodak EasyShare software is installed (see
printer dock is connected to your computer (see
2 Transfer the tagged pictures to your computer (see
3 Follow steps 4 through 6 above.
See the EasyShare software Help for details.
30
page
page 25).
page
page 25).
page 26).
www.kodak.com/go/support
page 26).
22) and the
22) and the