Kodak EasyShare Printer Dock Plus User Manual page 51

Kodak easyshare printer dock plus: users guide
Table of Contents

Advertisement

Print button/light
Light status
Light glows steady
green
Light blinks green
Light is off
www.kodak.com/go/support
Cause
The printer dock is ready for
printing.
The printer dock is printing.
There are no pictures in the
camera or on the card.
The camera is not docked or a
compatible Kodak card reader
is not connected.
The camera is not properly
seated on the connector.
The camera or card reader is
transferring pictures to the
computer, or has established
an active connection to the
computer.
A PictBridge compatible
device is connected.
Troubleshooting
Action/solution
None required.
None required.
To enable Print:
1
Take pictures.
2
Dock the camera, or
connect a compatible
Kodak card reader
(page
14). If using a card
reader, make sure a
memory card is inserted.
Reseat the camera on the
printer dock
(page
None required.
When transfer is complete,
press the blinking Transfer
button,
.
None required.
The Print button is disabled;
print command is controlled
from the PictBridge compatible
device. To print from another
source, unplug the PictBridge
compatible device.
9).
45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyShare Printer Dock Plus and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Printer dock plus - easyshare printer dock

Table of Contents