Advertisement

Quick Links

Wireless Video Door Phone
DP-266-1C7Q
Installation Manual
The ENFORCER Wireless Video Door Phone is a convenient and secure way to monitor and
control an entryway, such as a door or gate, from up to 492 feet (150 meters)* away. When a guest
or visitor presses the doorbell button on the camera unit, the homeowner can use one of up to
three lightweight, wireless LCD monitors
a photo, and decide whether to grant entry. The video door phone can be expanded with up to two
additional monitors and one additional camera. If multiple monitors are set up, then the system can
also be used as an intercom system between each monitor.
 Wireless operation – camera and monitor can
operate from up to 492ft (150m)* away
 Remotely and securely talk to visitors and unlock
doors or gates via the monitor
 Monitor can be carried around the premises while
talking to the visitor
 Connect up to two additional monitors and one
additional camera
 Intercom calling between paired monitors
 Camera has built-in IR LEDs for nighttime use
 Camera powered by 9~16 VAC/5~16 VDC
*Line-of-sight range. Actual range may vary depending on the installation and operating environment.
Additional monitors and camera sold separately.
to see who is requesting entry, speak with the caller, take
 Camera includes a built-in PIR sensor that
activates the camera and takes photos of the
visitor when they approach
 Monitor includes a kickstand
 Monitor front door at any time
 Egress input
 170° wide field of view
 Adjustable camera pan and tilt angle—up to 20°
from centerline in any direction—to allow for
mounting variations

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP-266-1C7Q and is the answer not in the manual?

Questions and answers

Summary of Contents for ENFORCER DP-266-1C7Q

  • Page 1: Introduction

    DP-266-1C7Q Installation Manual The ENFORCER Wireless Video Door Phone is a convenient and secure way to monitor and control an entryway, such as a door or gate, from up to 492 feet (150 meters)* away. When a guest or visitor presses the doorbell button on the camera unit, the homeowner can use one of up to...
  • Page 2: Table Of Contents

    1x USB Cable 1x AC Power adapter with USB port (for monitor) *The DP-266-1C7Q included monitor and camera are paired by default. † Additional monitors and cameras are not paired by default. See Pairing Additional Monitors or Cameras on pg. 14.
  • Page 3: Specifications

    Wireless Video Door Phone Specifications Monitor Camera Display 7" (178mm) TFT Type Color camera 12VDC (adapter) or Chip CMOS Operating voltage 3.7VDC (battery) Resolution 640 TV Lines Active 600mA@3.7VDC Current Lens draw Standby 5mA@3.7VDC Field of view 170° Active ~2.5 Hours Battery Camera angle Up to 20°...
  • Page 4: Overview

    Wireless Video Door Phone Overview Camera Camera angle adjustment joystick Wiring connections Camera (see pg. 6) IR LEDs PIR Sensor Reset button Speaker Battery cover Status LED Doorbell Microphone Monitor EXIT Exit/View Menu Unlock / OK (On/Off) Up/Record Down/Photo Right MicroSD Port Cover Brightness...
  • Page 5: Display Overview

    Wireless Video Door Phone Display Overview : ID – Displays the monitor ID number : Signal Strength – Displays the wireless signal strength : Communication Mode – Displays current communication mode – Bell indicates an incoming call – Crossed out microphone indicates one-way communication –...
  • Page 6: Camera Wiring Diagram

    Wireless Video Door Phone Camera Wiring Diagram Relay N.C. Output N.O. Egress input (N.O., –) (–) 9~16 VAC/ 5~16 VDC 1. Positive (+) power input – Connect to the red wire of the included AC adapter or to the positive wire of the doorbell's power supply.
  • Page 7: Installation - Camera

    Wireless Video Door Phone Installation – Camera 1. Position the camera so the area to be monitored is easily visible, optimally 5ft (1.5m) above the ground. Do not position the camera in direct sunlight, or where it will be exposed directly to rain or snow. NOTE: For best results, the visitor should stand 2.5~5 ft (0.8~1.5 m) away from the camera.
  • Page 8: On-Screen Display Features

    Wireless Video Door Phone Installation – Monitor (Continued) Turning the Monitor ON Hold the "ON/OFF" button for 3 seconds. The monitor will turn ON with the ENFORCER screen. Battery level indicator Standby Mode If the display is off, press the "ON/OFF" button momentarily to leave standby mode and turn the display ON.
  • Page 9: Programming And Using The On-Screen Display

    Wireless Video Door Phone Programming and Using the On-Screen Display 1. While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display. 2. Use the "Up" and "Down" buttons to move the cursor up or down. Use the "Menu/Unlock" button to move the cursor to the right.
  • Page 10: Programming The Advanced Settings

    Wireless Video Door Phone Programming and Using the On-screen Display (Continued) Programming the Time and Date 1. While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display. 2. Highlight the "Time" icon and press the "OK" button to enter the "Time" screen. 3.
  • Page 11 Wireless Video Door Phone Programming the Advanced Settings (Continued) Unlocking Duration 1. Select "Unlocking Duration" and press the "OK" button. 2. Select from 3, 6, or 8 seconds and press the "OK" button. NOTE: If multiple cameras are paired to the monitor, then select the desired camera. 3.
  • Page 12: Operating The Wireless Video Door Phone

    Wireless Video Door Phone Operating the Wireless Video Door Phone Communicating with the Camera Request entry 1. Press the doorbell button on the camera. The indoor monitor will ring and display an image from the camera. The monitor will also display a bell icon. 2.
  • Page 13: Resetting The Camera And Pairing A First Monitor

    Resetting the Camera and Pairing a First Monitor NOTE: By default, the monitor in the DP-266-1C7Q Complete Kit is paired with the camera. These instructions apply to resetting the camera and monitor system. 1. Put the camera into pairing mode: a.
  • Page 14: Pairing Additional Monitors Or Cameras

    Wireless Video Door Phone Pairing Additional Monitors or Cameras NOTE: By default, the monitor in the DP-266-1C7Q Complete Kit is paired with the camera. These instructions apply to pairing a second or third monitor, or a second camera. To Pair an Additional Monitor 1.
  • Page 15: Tamper Alarm

    Wireless Video Door Phone Tamper Alarm The tamper alarm activates anytime the camera is removed from the bracket, warning the user of possible vandalism. The tamper alarm will sound on the camera and any connected monitors. 1. To disable the tamper alarm if no monitors are paired with the camera: a.
  • Page 16: Accessories

    Wireless Video Door Phone Accessories Additional Monitor Additional Camera DP-266-M7Q DP-266-CAQ Replacement Rechargeable Lithium-Ion Replacement Rechargeable Lithium-Ion Battery for Monitor Battery for Camera DP-266-BM7 DP-266-BC FCC COMPLIANCE STATEMENT FCC ID: ERY-DP2661C7Q THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

This manual is also suitable for:

Dp-266-caqDp-266-m7q

Table of Contents