ENFORCER E-922CPQ Manual
  1. Manuals
  2. Brands
  3. ENFORCER Manuals
  4. Intercom System
  5. E-922CPQ
  6. Manual

ENFORCER E-922CPQ Manual

Voice dialer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E-922CPQ
Voice Dialer
Manual
When triggered by an alarm system, the ENFORCER Voice Dialer can dial up to 6 numbers (up to 3
times for each number) and deliver an 18-second user-recorded message, repeating up to two times.
The last 6 seconds of the message can be customized depending on which of the three inputs has
triggered the alarm. Each number can contain up to 14 digits, including the number, tones, and pauses.
The receiver can then listen in, stop further dialing of alarm numbers, or trigger an auxiliary relay output
connected to an external device such as a door lock, siren, strobe light, etc. The user is able to listen in
by remote call in as well as trigger or turn off the auxiliary relay.
NOTE: For single-line analog or VOIP telephone systems. The E-922CPQ may work with some digital
phone systems (single-line or PBX), depending on the system.
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-922CPQ and is the answer not in the manual?

Questions and answers

Related Manuals for ENFORCER E-922CPQ

Summary of Contents for ENFORCER E-922CPQ

  • Page 1 Voice Dialer Manual When triggered by an alarm system, the ENFORCER Voice Dialer can dial up to 6 numbers (up to 3 times for each number) and deliver an 18-second user-recorded message, repeating up to two times. The last 6 seconds of the message can be customized depending on which of the three inputs has triggered the alarm.

  • Page 2: Table Of Contents

    ENFORCER Voice Dialer Table of Contents: Table of Contents .......... 2 Setting the Trigger Mode ......8 Features ............2 Setting the Dialer "Beep" Volume ....8 Setting the Number of Rings for Remote Parts List ............2 Specifications ..........3 Access ............

  • Page 3: Specifications

    Weight 15.9-oz (450g) "x5 "x1 " (104x142x43 mm) Dimensions The E-922CPQ may work with some digital phone systems (single-line or PBX), depending on the system. Sample Applications and Wiring Diagrams: Stand-alone installation Contact/sensor or group of Keypad Auxiliary controlled device...

  • Page 4: Overview

    ENFORCER Voice Dialer Overview: Front (keypad cover open) Front (cover closed) Side Auto Dialer LCD Display Auto Dialer Ready Ready " (142mm) Keypad " " (104mm) (43mm) Keypad cover Back Back (base removed) Wiring hole and cutout Mounting holes Terminal block...

  • Page 5: Programming The Voice Dialer

    ENFORCER Voice Dialer Programming the Voice Dialer: You must enter setup mode to program the dialer functions. While in setup mode, if no key is pressed within 20 seconds, the dialer will automatically exit and return to standby mode. Entering Setup Mode:...

  • Page 6: Deleting A Stored Phone Number

    ENFORCER Voice Dialer Programming the Voice Dialer (Continued): Deleting a Stored Phone Number From the setup mode: 1. If "01 Alarm Number" is not shown on the display, press the Menu(1-12) 01 Alarm Number UP button until it appears, or press 01 on the keypad.

  • Page 7: Setting The Auto-Dial Mode

    ENFORCER Voice Dialer Programming the Voice Dialer (Continued): Setting the Auto-Dial Mode The dialer can be programmed to dial each programmed number once (up to 6 numbers) when an alarm is triggered, or it can continually dial each number in a loop until the dialer is reset. To set the dialing mode, in setup mode: 1.

  • Page 8: Setting The Trigger Mode

    ENFORCER Voice Dialer Programming the Voice Dialer (Continued): Setting the Trigger Mode With this setting, you can control how the dialer responds to a trigger even after the trigger has stopped. To set the Trigger mode, in setup mode: 1. Press the UP or DOWN button until you see "05 Trigger...

  • Page 9: Setting The Number Of Rings For Remote Access

    ENFORCER Voice Dialer Programming the Voice Dialer (Continued): Setting the Number of Rings for Remote Access This setting controls the number of rings after which the voice dialer will "answer" to allow for remote access by the user. To set the number of rings, in setup mode: 1.

  • Page 10: Making A Test Call

    ENFORCER Voice Dialer Programming the Voice Dialer (Continued): Making a Test Call The dialer can make a test call to ensure that the numbers have been set up correctly. During the call, the speaker allows you to monitor the call's progress. To place a test call, in setup mode: 1.

  • Page 11: Viewing The Last Event

    ENFORCER Voice Dialer Operating the Voice Dialer (Continued): REMOTE CONTROL BY USER CALL-IN (CALL BACK) The user can dial in to perform the actions below remotely. To do so: 1. Using a mobile phone or any touch-tone (DTMF) phone, dial the phone number that the voice dialer is connected to.

  • Page 12: Notices, Warnings, And Warranty

    If trouble is experienced with this equipment product Model: E-922CPQ, for repair or warranty information, please contact SECO-LARM U.S.A., Inc. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Table of Contents