Advertisement
5. Unit Login
After the system boots up, the default video display is in multi-window mode.
See Figure 3 for the login interface.
Listed below is the default login ID:
Username: admin (administrator, local and remote)
Note:
For security purposes, it is required to create the administrator password on the initial login.
5 incorrect login attempts within 30 minutes will result in a lock on the account. Once the unit is
locked, please wait for 30 minutes before attempting to log in again.
To reset the password, please contact Speco Technologies Technical Support.
Figure 3
6. Remote Web Access
Open Internet Explorer and enter the NVR's IP address in the address bar.
Follow the instructions to install the plug-in.
After installation, the login interface is shown as below. See Figure 4.
Please enter the user name and password.
Figure 4
5
Advertisement
