Formatting A Pcmcia Card - Kodak EOS-DCS 1 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Formatting a PCMCIA Card

This section describes how to format a PCMCIA card, an action you may
need to take now as you start to use the camera, and may need to repeat
later on an occasional basis when you want to format another card, or to
reformat a card you have been using with the camera.
To complete these steps, the camera must be connected to your computer
as described earlier in this chapter. We also assume that a supported
application is currently running on your computer, and that you have
accessed the driver image window by choosing the driver as described
earlier in this chapter.
A PCMCIA card used for image storage must be (DOS) formatted using the
camera with the supplied driver as described in this section.
1. Click the camera control icon of the driver image window. You see
the C
1.
2.
©
4-40 Preparing the Camera and the Computer
C dialog box.
AMERA ONTROL
G