Setting Focus; Formatting A Card - Kodak DCS Pro 14n Quick Start Manual

4. Choose Camera Settings

Setting Focus

1. Set the Focus Mode selector to S (Single Servo AF).
2. Set the Exposure Mode dial to AF Area Mode.
3. Turn the Main Command dial until [ ] (Single Area AF)
appears in the Top Status LCD.
4. Lightly press the Shutter Release button, and press any
side of the Four-way switch to choose the center focus
area.
Setting the Metering System and Exposure Mode
1. Set the Metering System selector to
The Matrix Metering symbol appears in the viewfinder.
2. Set the Exposure Mode dial to P (Programmed Auto).
(Matrix Metering).
- 7 -
5. Choose Digital Settings
The Basic Mode menu is shown here. See the User's Guide for Advanced Mode. Advanced
Mode provides additional choices such as 2 memory cards, JPEG quality, and the ability
to save Raw images.
Using the Basic Menu
1. Press the Menu button to display the Basic Mode menu
on the Image LCD.
2. Press the top or bottom of the Four-way switch to
highlight a menu option.
3. Press the right of the Four-way switch to display and
enable a pop-up menu, then press the top or bottom
of the Four-way switch to highlight a menu option.
4. Press the OK button.

Formatting a Card

1. Choose Format Card from the
Basic menu.
2. Press the OK button.
- 8 -