Kodak EOS-DCS 1 User Manual page 80

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
provides one example using the KODAK Driver with Adobe Photoshop.
If you use other supported software, refer to its documentation to deter-
mine if it is TWAIN-compliant, and if it is, how it provides access to
TWAIN drivers.
As you use a variety of TWAIN-compliant software, it may be helpful to
know how the TWAIN specifications expect applications to perform. The
specifications provide for a consistent software interface by encouraging
software developers to include two specific commands — S
and A
should first choose S
compliant device drivers installed on the system. After the user selects a
driver from the list, he/she should be returned to the application. The user
should then choose A
allow the user to obtain image data.
IMPORTANT: Some image editing software takes all available RAM by default at
start-up. The TWAIN driver will not work if this occurs. To avoid the problem, set
the memory preference for your application (often found on the F
there is at least one megabyte of free RAM.
Once you have installed the TWAIN driver as described earlier in this
chapter, and are running Photoshop, you access the driver by following
these steps.
1. Choose S
Photoshop F
earlier supported versions of Photoshop choose S
on the A
2. Click the name of the camera driver.
3. Click S
NOTE: The choice is maintained in a preference file for the TWAIN-compli-
ant driver; you do not need to repeat steps 1 through 3 each time you use the
driver.
©
4-36 Preparing the Camera and the Computer
— on the F menu. The specification intends that users
CQUIRE ILE
S
ELECT OURCE
CQUIRE
TWAIN S
ELECT
menu; the S
ILE
submenu on the Adobe Photoshop F
CQUIRE
; you are returned to Photoshop.
ELECT
which should display a list of TWAIN-
which should open access to the device and
on the I submenu on the Adobe
OURCE MPORT
S dialog box appears. (For
ELECT OURCE
G
S
ELECT OURCE
menu) so that
ILE
TWAIN S
ELECT OURCE
menu.)
ILE