Kodak EOS-DCS 1 User Manual page 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 2 2 2 2
Introduction 2-1
KODAK Camera Back 2-3
Features 2-4
3 3 3 3 3
Quick Start 3-1
4 4 4 4 4
Preparing the Camera and the Computer 4-1
Using the AC Battery Charger/Adapter 4-3
Charging the Battery 4-4
Setting the SCSI ID on the Camera 4-7
Installing a SCSI Host Adapter (TWAIN PC Only) 4-12
Making the SCSI Connection 4-13
Camera as the Sole SCSI Device 4-13
Camera Used with Other SCSI Devices 4-17
Camera Used with a Macintosh PowerBook or a PC Laptop 4-23
Inserting and Removing a PCMCIA Card 4-26
Inserting a PCMCIA Card 4-26
Removing a PCMCIA Card 4-30
Installing the KODAK Driver 4-32
Accessing the Camera from the Driver 4-35
Special Instructions for TWAIN-compliant Software 4-35
Final Steps to the Driver Window 4-37
Updating Camera Firmware 4-38
Formatting a PCMCIA Card 4-40
Quitting - Disconnecting the Camera from the Computer 4-42
5 5 5 5 5
Using the EOS•DCS Camera 5-1
Readying the EOS•DCS Camera 5-2
Accommodate for the Absent Quick Control Dial 5-5
xviii
Macintosh PowerBook with No External SCSI Devices 4-23
PC (for TWAIN driver) 4-25