Kodak EOS-DCS 1 User Manual page 178

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Turn off the camera.
3. Remove the lens from the camera.
4. Turn on the camera.
5. Select the bulb mode. (Press and hold down the shooting mode
selector — Mode — and rotate the main dial until "bulb" is dis-
played.)
6. Press and hold the shutter release button; the shutter stays open, and
the imager is visible through the lens mounting flange.
CAUTION: Do not attempt to clean the imager while the camera is in
this state; the shutter can be damaged if you release the shutter button
while any object is in the opening.
©
7-40 Reference — Camera
G
Imager
(visible through
lens mounting flange)
Lens mounting flange