Click-Balance Tool - Kodak EOS-DCS 1 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
camera or with the selected image archive files. Changes you make in
these settings are visible on the images displayed on your computer
monitor.
The choice you make is used for color correction by the driver when the
image is acquired. The menu provides the following choices.
D
AYLIGHT
T
UNGSTEN
F
LUORESCENT
Flash
L. Click-Balance Tool
Unlike the lighting menu which provides distinct choices to match
lighting conditions under which the image was made, the click-balance
tool provides a more refined method of color balancing, and is always the
preferred method of applying color balancing to images
The 'checkbox' appears on the left of the tool, and the 'eyedropper' is on
the right.
Uses daylight color-correction values when acquiring the
image.
Uses tungsten color-correction values when acquiring the
image.
NOTE: The Tiffen Hot Mirror filter is always recommended when
shooting under tungsten lighting. A filter for one size lens is
supplied; filters for other size lenses are available. Without the
filter, color results may not be very accurate with a tungsten light
source; however, acceptable color rendition can be obtained with
this filter under tungsten lighting.
Uses fluorescent color-correction values when acquiring the
image.
Uses flash color-correction values when acquiring the
image.
©
Reference — Kodak Driver Software
G
8-35