Replacing the Chassis Support Bracket
1. Holding the bracket at an angle, insert the tabs on one end of the bracket into the slots in the chassis.
2. While holding the bracket slightly raised, slide any cables as appropriate into the cable clip for storage.
3. Lower the other end of the bracket to engage the remaining tab.
4. Rotate the flange closed and replace and tighten the securing screw.
1
chassis support bracket
3
screw
5
slots (2)
5. Perform the steps in the procedure
Back to Contents Page
Great user manuals database on
2
flange
4
cable clip
6
tabs (2)
After Working on Your
Computer.
UserManuals.info