and DIMM_2
1. Align the notch on the bottom of the module with the crossbar in the connector.
.
1
cutouts (2)
3
notch
NOTICE:
module.
2. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
3. Follow the procedure in
4. When the message appears stating that memory size has changed, press <F1> to continue.
5. Log on to your computer.
6. Right-click the My Computer icon on your Windows® desktop and click Properties.
7. Click the General tab.
8. To verify that the memory is installed correctly and being recognized by the computer, check the amount of memory (RAM) listed.
Back to Contents Page
Great user manuals database on
and DIMM_4
2
memory module
4
crossbar
To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the
After Working on Your
Computer.
UserManuals.info