Pairing - Geemarc CL7500 OPTI Manual

2.4 ghz wireless digital quality sound

Hide thumbs Also See for CL7500 OPTI:

Table of Contents

Available languages

Your Headset was paired with the Charging Base at the factory so that

when you switch on the Headset, it will automatically recognise the

Base� However, if for any reason the Headset and Base are no longer

paired, there is a very simple procedure to follow in order to pair the

two devices:

Step

: Switch on the headset by press and hold the power button

for 3 seconds, the Power button

Step

: Enter Pair mode of the headset by press and hold the Power

button

for 5 seconds�

Step

: The Power Button

blink green�

Step

: Enter Pair mode of the charging base by press and hold the

PAIR Button found on the rear of the Base for 3 seconds ( a pencil with

a sharp point might help with this operation), the Led of the base will

change to blink green�

Step

: The Headset and charging base will be paired as shown by the

green light on the headset and charging base�

PAIRING

of the headset will change from red to

should light up a red color�

Table of Contents

Table of Contents