Preparations Of The Protect Tube; Insertion Of The Probe - Hitachi UST-5550 Instruction Manual

MN1-5575 Rev. 11
・ Angle marker
The angle marker is a white line that indicats the angle of the
deflection portion. When the two white lines coincide it
means that the deflection portion is nearly straight.

4-1-2. Preparations of the protect tube

Attach the cap to protect tube.

4-1-3. Insertion of the probe

① Insert the protect tube into the trocar outer sheath and
fix the lever to the trocar outer sheath.
[Remarks]
After fixing the lever, cover the insertion opening for the
probe by finger to prevent gas leakage.
② Manipulate the angle knob in FREE condition of the
lock lever, align the angle marker for straighten the
deflection portion of the probe.
Attach the cap
-20-
White lines
Lever