Cooling Operation - Airxcel RVP INFRARED REMOTE CONTROL SYSTEM Operating Instructions Manual

A.

COOLING OPERATION

Cool symbol
1. Using the handheld remote, select the cool symbol by pressing the "MODE"
button until the cool symbol is displayed.
2. Select a fan speed that best satisfies your need by pressing the fan button
located above the "MODE" button:
a.
b.
c.
d.
3. Set temperature to the desired level by pushing the up (+) or down (-) button.
High speed
Low speed
Auto low speed
Auto high speed
- Continuous high fan speed operation
- Selected when maximum cooling is required.
- Continuous low fan speed operation
- Selected when room reaches desired
comfort level and needs to be maintained.
Normally this low speed is used for nighttime
operation.
-Low fan cycles with the compressor
-Fan cycles with the compressor
-Auto high will control fan speed depending on
the cooling requirement
5