Package Contents
• P778-006-DP
• Quick Start Guide
Product Features
• Connects a VGA-interfaced KVM switch to a DisplayPort and USB-enabled computer
• Supports video resolutions up to 1920 x 1080 @ 60 Hz
• DisplayPort 1.1 compliant
• Supports USB keyboard and mouse
• Bus-powered – no external power adapter required
• Easy installation – no software required
Installation
Note: Before installation, please make sure all equipment is powered off and properly grounded.
• This cable works with the following Tripp Lite KVM models only: B022-U08, B022-U08-IP , B022-U16-IP , B020-U08-19-IP ,
B020-U16-19-IP , B020-U08-19-K and B020-U16-19-K.
• The toggle option on the back of the unit allows you to decide the power mode, meaning it will draw power from the
"USB Power" port or "USB & DP Power" port, depending on which option you choose.
1. Plug the VGA connector into an available HD15 port on the KVM switch.
2. Plug the other end of the cable into the computer's USB and/or DisplayPort ports.
3. Toggle the switch on the back of the unit to the USB & DP or USB position for the power mode needed. The Green LED
on the front of the unit indicates you are switched to USB & DP power mode, while an Orange LED will indicate you are
switched to USB power mode.
4. Power on your devices.
Specifications
Model
Input Connectors
Output Connectors
Operating Temperature Range
Storage Temperature Range
Relative Humidity Range
Max Supported Resolutions
DisplayPort Specification
Max Support Color Depth
P778-006-DP
HD15 (Male)
DisplayPort (Male), USB-A (Male)
32°F to 122°F (0°C to 50°C)
-4°F to 140°F (-20°C to 60°C)
0% to 80% RH, Non-Condensing
1920 x 1080 @ 60 Hz
1.1
36-bit Deep Color
2