Table of Contents
Advertisement
iLO prompts you to confirm the request.
4. Click OK.
Virtual power button options
•
Momentary Press—The same as pressing the physical power button. If the server is powered off, a momentary press
will turn on the server power.
Some operating systems might be configured to initiate a graceful shutdown after a momentary press, or to ignore
this event. Hewlett Packard Enterprise recommends using system commands to complete a graceful operating system
shutdown before you attempt to shut down by using the virtual power button.
•
Press and Hold—The same as pressing the physical power button for 5 seconds and then releasing it.
The server is powered off as a result of this operation. Using this option might circumvent the graceful shutdown
features of the operating system.
This option provides the ACPI functionality that some operating systems implement. These operating systems behave
differently depending on a short press or long press.
Reset—Forces the server to warm-boot: CPUs and I/O resources are reset. Using this option circumvents the graceful
•
shutdown features of the operating system.
•
Cold Boot—Immediately removes power from the server. Processors, memory, and I/O resources lose main power. The
server will restart after approximately 8 seconds. Using this option circumvents the graceful shutdown features of the
operating system.
Virtual media IRC features
The integrated remote console (IRC) allows you to perform the following tasks:
•
Connect and disconnect virtual drives including:
◦
Local IMG or ISO files
◦
URL-based media (ISO or IMG)
Using a virtual drive (physical drive on a client PC)
Prerequisites
•
Remote Console privilege
•
A license that supports this feature is installed. For information about the available license types and the features they
support, see the licensing documentation at the following website: https://www.hpe.com/support/ilo-docs.
The Remote Console feature is enabled on the Access Settings page.
•
•
The Virtual Media feature is enabled on the Access Settings page.
•
If you are using the remote console with Windows, you have Windows administrator rights, which are required for
mounting a physical drive.
Procedure
1. Click Remote Console & Media in the navigation tree.
The Launch tab displays the remote console launch options.
2. Start a remote console that supports this feature.
83
Using HPE iLO 5
Advertisement
Table of Contents
