Page 2
port on ECAT-2511-A. Fiber Optic Connect the fiber optic to the FO port of the ECAT-2511-A and ECAT-2511-B. Verify the “PWR”, “IN” and “FO” LED indicators are blinking. Green, OK Red, OK E-mail: service@icpdas.com...
Page 3
Connecting the Slave I/O Module Connect the EtherCAT slave I/O module (e.g., the ECAT-2055) to OUT port on the ECAT-2511-B. Note that the ECAT-2055 module is used as an example. For other ECAT-2000 series module, refer to the specific Quick Start Guide or user manual for that ECAT-2000 series module. Ethernet ...
Page 4
ECAT-2500 Click Yes to start scanning and click Yes to activate the free run mode for TwinCAT system manager The ECAT-2511-A, ECAT-255-B and EtherCAT slave I/O module (e.g., ECAT-2055) are now shown in the TwinCAT System Manager. Related Information Product Page: http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/ethercat/ethercat_selection_gu...