Pulse Input Modes - Vexta CFK II Series Operating Manual

Pulse input modes

Set the pulse-input mode switch to either 1-pulse input mode or 2-pulse input mode,
whichever the controller uses.
Note
Set the pulse-input mode switch when the driver power is off.
Factory setting
Setting 1-pulse input mode
When operating the motor with pulse input and rotation-direction input, switch the pulse-
input mode selector switch to the "1P".
Setting 2-pulse input mode
When operating the motor with two pulses (CW pulse input and CCW pulse input) switch
the pulse-input mode selector switch to the "2P".
[1P: 1-pulse input mode]
Pulse-input mode selector switch
29