Supported Drives - IBM 2076-824 Getting Started Manual

Flashsystem 7200 control enclosure
Hide thumbs Also See for 2076-824:
Table of Contents

Advertisement

Supported drives

The following table lists the supported drives for the system. For more information about replaceable units, see IBM Knowledge Center.
Table 2: Control enclosure drives
FRU Part Number
01YM585
01YM586
01YM587
01YM588
01YM589
02PX477
02PX478
02PX482
02PX483
02YC416
02YC417
02YC418
02YC419
Management and service address worksheet
Use the following table to record the management address and service addresses for each control enclosure. The primary system address
is bound to Ethernet port 1. The secondary system address, if specified, is bound to Ethernet port 2. Both IPv4 and IPv6 addresses can be
used. Specify the type of installation and the serial number (S/N) of the control enclosure.
If you are installing a new system installation, designate new, unused IP addresses.
If you are adding an I/O group (control enclosure) to an existing system, use the management address of the existing system.
Table 3: Magement IP address and service IP address worksheet
Control Enclosure S/N:
Address Type
Primary system address (required)
Optional secondary system address (optional)
Node canister 1 service address (required)
Node canister 2 service address (required)
Network cable worksheet
Use the cable-connection tables to record the location and type of cable connections for each control enclosure in the system.
Ethernet cable standards
The control enclosure supports Ethernet connection by using onboard ports and ports on networking adapters. The following table
summarizes the Ethernet cable standards for each connection.
Table 4: Ethernet cable standards
Ethernet port type
1 Gbps Ethernet technician port
Description
800 GB 2.5" NVMe Flash drive
1.92 TB 2.5" NVMe Flash drive
3.84 TB 2.5" NVMe Flash drive
7.68 TB 2.5" NVMe Flash drive
15.36 TB 2.5" NVMe Flash drive
375 GB 2.5" NVMe Optane SCM drive
750 GB 2.5" NVMe Optane SCM drive
800 GB 2.5" NVMe SCM drive
1.6 TB 2.5" NVMe SCM drive
4.8 terabytes usable (TBu) / 21.99 terabytes effective (TBe) NVMe IBM FlashCore Modules (FCM) 2.0
9.6 TBu / 21.99 TBe 2.5" NVMe FCM 2.0
19.2 TBu / 43.98 TBe 2.5" NVMe FCM 2.0
38.4 TBu / 87.96 TBe 2.5" NVMe FCM 2.0
Are you adding this control enclosure to an existing system? ❐ Yes ❐ No
IP Address
Network Mask
Cable type
Minimum standard
TP
Cat 5e
Default Gateway
Connector
RJ45

Advertisement

Table of Contents
loading

This manual is also suitable for:

2076-u7c

Table of Contents