ekwb EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set User Manual page 9

Gpu water block

Hide thumbs Also See for EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set:

Table of Contents

TERMINAL

O-RING 14x1 mm

M2.5-M3x6.6 STANDOFF

PCB

CARDBOARD

M3.5-M2.5x11.3 STANDOFF

ACTIVE BACKPLATE

STEP 2

STEP 3

- 9 -

STEP 2

Carefully remove the complete active backplate with the terminal.

Additional two (2) O-rings 14 x 1 EPDM50 needs to be removed.

STEP 3

Unscrew four (4) M2.5-M3 x 6.6 standoffs with the provided

tool (EK-Plug out Spludger Tool). Make sure not to unscrew the

M3.5-M2.5 x 11.3 standoff! In case the M3.5-M2.5 x 11.3 standoff

unscrews, carefully tighten it back with the 4 mm wrench. After

removing the standoffs, the PCB cardboard. Save the removed

parts for later use.

For this step, you will need:

EK-Plug Out Spludger Tool

Table of Contents

Need help?

Do you have a question about the EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set and is the answer not in the manual?