ekwb EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set User Manual page 12
Gpu water block
Hide thumbs
Also See for EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set:
- Manual (21 pages) ,
- User manual (21 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
M2.5 x 4 AX1
M2.5 PVC
SCREW
WASHER
STEP 2
STEP 2
Use five (5) M2.5 x 4 AX1 screws and PVC washers to tighten
the GPU PCB. Tighten the screws evenly using the Phillips-head
screwdriver. EK recommends you start tightening the screws
around the GPU core first and then continuing outward to prevent
damaging the GPU. Always use a plastic washer under each screw.
For this step, you will need:
Phillips Head Screwdriver
Screws must be present in the places marked on the picture.
- 12 -
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set and is the answer not in the manual?
Questions and answers