REPLIGEN X-Flo76 User Manual

SPECIFICATIONS
• Effective Membrane Area
30cm 2 (4.6in 2 )
• Recommended Crossflow Rate
50-200 mL/min
Maximum Operating Pressure
•
2.8 bar (40 psi)
CHEMICAL RESTRICTIONS
Do not use the X-Flo76™ device with the following materials:
• DMF
• M-PYROL
• 10% phosphoric acid
• Pure aromatic and chlorinated hydrocarbons
• Ketones
• DMSO
• Polar aromatics
• Aliphatic esters
REPLIGEN TANGENX™ STANDARD WARRANTY
Repligen Corporation warrants its TangenX™ products will meet their
applicable published specifications when used in accordance with their
applicable instructions for a period of one year from shipment of the products.
REPLIGEN MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED. THERE IS
NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The warranty provided herein and the data, specifications and
descriptions of Repligen TangenX™ products appearing in published
catalogues and product literature may not be altered except by express
written agreement signed by an officer of Repligen. Representations, oral or
written, which are inconsistent with this warranty or such publications are not
authorized and if given, should not be relied upon.
In the event of a breach of the foregoing warranty, Repligen's sole obligation
shall be to repair or replace, at its option, the applicable product or part
thereof, provided the customer notifies Repligen promptly of any such breach.
If after exercising reasonable efforts, Repligen is unable to repair or replace
the product or part, then Repligen shall refund to the customer all monies paid
for such applicable product or part. REPLIGEN SHALL NOT BE LIABLE FOR
CONSEQUENTIAL, INCIDENTAL, SPECIAL OR ANY OTHER DAMAGES
RESULTING FROM ECONOMIC LOSS OR PROPERTY DAMAGE SUSTAINED.
IF.PUG.001 R3
X-Flo76™
USER GUIDE
76mm Disc Membrane Screening System
Phone 508.845.6400 | Fax 508.845.3030
www.repligen.com/tangenx
TXCustomerService@repligen.com