Power DALI push-button controller TW
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual
fully.
Danger of electric shock. Always disconnect before carrying out work on the device
or load. In so doing, take all the circuit breakers into account, which support danger-
ous voltages to the device and or load.
This manual is an integral part of the product, and must remain with the end cus-
tomer.
2
Intended use
–
Switching and brightness setting for luminaires with DALI interface
–
Setting the colour temperature for luminaires with DALI Device Type 8 for Tun-
able White in accordance with IEC 62386-209
–
Mounting in appliance box with dimensions according to DIN 49073
–
Operation with suitable cover from the systems LB management, JUNG
HOME, eNet and KNX RF
Since error-free interaction cannot be guaranteed in combination with other
DALI controls, it is thus not recommend.
Product characteristics
–
DALI supply for a maximum of 18 DALI subscribers
–
Parallel switching of up to 4 DALI control units with the option of supplying up
to 72 DALI subscribers
–
Storing of minimum brightness, coldest and warmest colour temperature
–
Switching on with the last set brightness/colour temperature or saved bright-
ness/colour temperature
–
With 2-gang operating cover: adjustment of the colour temperature via right
rocker
3
Operation
These instructions describe operation with a LB Management push-button 1-gang
and LB Management push-button 2-gang. Operation with different covers is de-
scribed in the instructions for the cover in question. Operation using 2-wire or 3-wire
extension essentially corresponds to operation on the main device.
With a LB Management push-button 2-gang, the left rocker works like the LB Man-
agement push-button 1-gang. The right rocker is used to directly set the colour tem-
perature.
82598933
J0082598933
3 / 9
19.08.2022