Table of Contents
Advertisement
Introduction
NOTICE
For industrial use only
This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based communications.
Note
The Siemens speed sensor is to be used only in the manner outlined in this manual,
otherwise protection provided by equipment may be impaired.
This manual covers only speed sensor installation, operation, and maintenance procedures. It is
your responsibility to read this manual, and any manual for a product used in conjunction with
the SITRANS WS100 (such as a belt scale integrator), before installing and operating any
component of the weighing system to which the speed sensor will be applied.
Integrator and speed sensor instruction manuals are available for download from our website
(http://www.siemens.com/weighing)
Follow these operating instructions for quick, trouble-free installation, and maximum accuracy
and reliability of your weighing system.
We always welcome suggestions and comments about manual content, design, and
accessibility. Please direct your comments to:
Technical publications (mailto:techpubs.smpi@siemens.com)
1.1
SITRANS WS100 Speed Sensor
SITRANS WS100 speed sensor is a compact, medium-resolution pulley shaft-driven belt speed
sensor with magnetic mounting. It is ideal for aggregate and mineral processing industries.
This small, light-weight speed sensor features:
● Good resolution for accurate measurement, suitable for varying shaft speeds
● Long bearing life
Eight pulses are generated for each rotation of the SITRANS WS100 shaft. These pulses are
typically fed into a Milltronics belt scale integrator. The integrator interprets the pulses and uses
them in the calculation of belt speed, flow rate, and material totalization.
SITRANS WS100
Operating Instructions, 06/2011, 7ML19985LU02-00
1
5
Advertisement
Table of Contents
