Command Details - Cisco Touch10 Manual

Use of a Video Switch

Command Details

UserInterface Presentation ExternalSource Add
This command establishes and defines an input source.
xcommand UserInterface Presentation ExternalSource Add
ConnectorId
ConnectorId:
SourceIdentifier
Type:
in which:
ConnectorId
: The ID of the codec connector to which the
external switch is connected
Name
: Name displayed on touch 10
SourceIdentifier
: A unique string ID used to identify this source
when selecting or setting state
Type
: Decides what icon is displayed on the Touch 10, choose
between: <pc/camera/desktop/document_camera/mediaplayer/
other/whiteboard>
Example:
xcommand UserInterface Presentation ExternalSource Add
ConnectorId: 3 Name: "Blu-ray"
SourceIdentifier: bluray Type: mediaplayer
UserInterface Presentation ExternalSource List
This command returns the current list of external sources.
xcommand UserInterface Presentation ExternalSource List
UserInterface Presentation ExternalSource
Remove
This command removes a source from the list.
xcommand UserInterface Presentation ExternalSource Remove
SourceIdentifier
SourceIdentifier:
in which:
SourceIdentifier
is a unique string ID used to identify this
source when selecting or setting state.
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
UserInterface Presentation ExternalSource
RemoveAll
This command removes all sources from the list.
Name
Name: SourceIdentifier:
xcommand UserInterface Presentation ExternalSource RemoveAl
Type
UserInterface Presentation ExternalSource
Select
Starts to present the selected source if it is in ready state and
has a valid ConnectorId. Also shows the item in sharetray as
"Presenting" .
xcommand UserInterface Presentation ExternalSource Select
in which:
SourceIdentifier
when selecting or setting state.
SourceIdentifier
SourceIdentifier:
is a unique string ID used to identify this source
UserInterface Presentation ExternalSource State
Set
Used to change state of the source with SourceIdentifier.
xcommand UserInterface Presentation ExternalSource State
SourceIdentifier
Set SourceIdentifier:
ErrorReason
[ErrorReason: ]
in which:
SourceIdentifier
: is a unique string ID used to identify this
source when selecting or setting state
State
: <Error/Hidden/NotReady/Ready> Ready is the only
presentable state, hidden exists in the list but does not show in
the sharetray.
ErrorReason
: Optional. Displays in the share tray if the state is set
to Error.
33
State
State: