Commands - Cisco Touch10 Manual

Command Reference

Commands

UserInterface Extensions Widget SetValue
This command sets the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. If the
value is out of range, the command returns an error.
USAGE:
xCommand UserInterface Extensions Widget SetValue Value:
WidgetId
WidgetId:
in which
Value
: String (0, 255)
The value of the widget. The range of values depends on the
widget type.
WidgetId
: String (0, 40)
The unique identifier for the widget.
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
UserInterface Extensions Widget UnsetValue
This command empties the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. The
user interface is notified that the widget is no longer selected.
USAGE:
Value xCommand UserInterface Extensions Widget UnsetValue WidgetId:
WidgetId
in which
WidgetId
: String (0, 40)
The unique identifier for the widget.
UserInterface Extensions Clear
This command deletes all user interface extensions (widgets)
from the video system.
USAGE:
xCommand UserInterface Extensions Clear
UserInterface Extensions List
Use this command to list all user interface extensions (widgets)
that exist on the video system.
USAGE:
xCommand UserInterface Extensions List
29