Table of Contents
Advertisement
BOSCH TECH 2
Presented by Bob Pattengale
After the reprogramming is complete, you will be prompted to do some controller specific
procedures. you need to follow any procedures listed before moving on to the next step.
One thing you need to keep in mind here is that we have only reflashed the PCM. If by chance
there were other updates for other controllers such as the BCM, you would need to click on the
"Proceed with same vIN" tab at the bottom of the screen. By doing this, you will be able to
reprogram any control module that has an update available.
gM has made it very easy to find all of the available calibrations for their vehicles. All you need
to do is go to https://www.acdelcotds.com/acdelco/action/techinfo. Once you have navigated to
the site, just click on the "Reprogramming" option to continue.
50
1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com
RePROgRAMMINg
Performing The Reprogram
Reprogramming Calibration Information
Advertisement
Table of Contents
