Advertisement
Quick Links
MODEL # 2050TP
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation
of this spreader.
▪
Obtain proper setting for material to be used
from the SETTING MATRIX included with this
spreader.
▪
Move stop bolt on rate gauge assembly to the
proper setting and tighten to secure.
▪
While pulling spreader forward, push control
lever toward the spreader to the stop bolt. To
stop, pull lever forward to close flow holes
before you stop moving.
▪
When finished, empty any remaining material
from hopper.
▪
To prevent corrosion, spray a light oil or Fluid
Film inside the tubing of the chassis and on all
metal parts.
SIDE SPREAD CONTROL
The Side Spread Control is an innovation that eliminates the need to use a side deflector, which can adversely affect
your application rate, to prevent material from being spread into flowerbeds, on sidewalks, or driveways. The Side
Spread Control maintains the correct application rate while it is activated, giving you excellent results in seeding or
spreading while controlling the spread pattern on the left side of the spreader. The Side Spread Control is an
EarthWay® exclusive.
Earthway_2050TP Manual_ (002)
80lb Estate Tow
Broadcast Spreader
ASSEMBLY INSTRUCTIONS
spreader. Our customer support team is
standing ready to ensure your success. Please
contact us at www.EarthWay.com to see our
full line of commercial, lawn & garden tools.
Note: Your EarthWay spreader includes a
feature called side spread control. This
feature shuts off the left side of your spreader,
allowing only the right side to continue
spreading evenly. To activate this feature, slide
the lever below the hopper to the right (if
standing behind the spreader) and walk along
a sidewalk or flowerbed that is 12"-14" on
your left side. Fertilizer will not spread to the
left. This feature is better than a deflector as
no material is wasted by the deflector.
For spreading, please utilize the following
spreader settings:
Thank you for selecting
EarthWay for your
spreader needs. Our
production team in
Northern Indiana takes
pride in building this
PAGE 1
Advertisement
Related Manuals for EarthWay 2050TP
Summary of Contents for EarthWay 2050TP
- Page 1 Our customer support team is standing ready to ensure your success. Please contact us at www.EarthWay.com to see our full line of commercial, lawn & garden tools. Note: Your EarthWay spreader includes a feature called side spread control. This...
- Page 2 Assembly and Operation Instructions SIDE SPREAD CONTROL OPERATION The Side Spread Control lever is located on the back of the hopper at the bottom. To operate the Side Spread Control, slide the control lever from the left, to the right. This will activate the Side Spread Control for a PARTIAL spread pattern and prevent material from being spread to the left side of the spreader.
-
Page 3: How To Order Spare Parts
Assembly and Operation Instructions HOW TO ORDER SPARE PARTS All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when ordering. 1. Model Number 2. Part Number 3. Part Description Earthway_2050TP Manual_ (002) PAGE 3... - Page 4 The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the above conditions, EARTHWAY PRODUCTS, Inc. makes no warranty as to the uniformity of coverage actually obtained from the settings listed.
-
Page 5: Customer Service
ONE YEAR WARRANTY EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by EarthWay.