4
Repeat for every bed slat until finished.
Step 7
You will need
Allen Key
2 x Screws
(H2)
Ensure the inner space is square.
Attach the felt pad (H6) to the centre of the centre rail (P6) as shown. Secure the timber cross
rail (P10) into place in the centre of the side rails (P5) using 2 x screws (H3), and tightening
fully with the Phillips Head Screwdriver.
You may now fully tighten all bolts on the headboard (P1), footboard (P2) and
side rails (P5).
fantasticfurniture.com.au
Felt Pad
(H3)
(H6)
(H6)
Phillips Head
Screwdriver
(P10)
(P6)
Make sure small
screw is tightened.
(H3)
(H2)
(P10)
Page 9