Page 1
Version 1.0 Cove Bedside 1 Drawer fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
What you need to assemble the product Top Panel (P1) Right Side Panel (P4) DO NOT USE Back Panel (P5) Other tools you need: Phillips head screwdriver; Hammer Bottom Panel (P2) Left Side Panel (P3) (P6) Parts list Top Panel (P1); Bottom Panel (P2);...
Page 5
Step 1 You will need 4 x Cam Bolts Phillips Head (H3) Screwdriver (P1) Attach 4 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver. Step 2 You will need 6 x Small 1 x CL Runner Screws (H5) Track (H6)
Page 6
Step 3 (P3) You will need (P4) 4 x Dowels 4 x Cam Nuts (H1) (H4) Phillips Head Screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the (P1) cam nut.
Page 7
Step 5 You will need (P2) 4 x Dowels 4 x Long (H1) Screws (H2) Phillips Head (P3) Screwdriver (P4) Attach Bottom Panel (P2) to Left & Right Side Panel (P3 & P4) with 4 x Dowels (H1) and secure with 4 x Long Screws (H2). Tighten with a Phillips Head Screwdriver. H10 H10 Step 6 H10 H10...
Page 8
Step 7 You will need (P6) (P6) 4 x Plastic Hammer Glides (H17) (P6) (P6) (P2) Turn 4 x Legs (P6) into brackets until firm. Hammer 4 x Plastic Glides (H17) on Legs (P6 x 4) as shown. Step 8 You will need 4 x Cam Bolts Phillips Head...
Page 9
Step 9 You will need (P9) 4 x Long Phillips Head Screws (H2) Screwdriver (P8) (P10) Attach Drawer Back (P10) to Left & Right Drawer Side (P8 & P9) with 4 x Long Screws (H2) by tightening with the Phillips Head Screwdriver. Step 10 (P11) (P9)
Page 10
Step 11 (P7) You will need 4 x Cam Nuts Phillips Head (H4) Screwdriver (P9) (P8) Insert 4 x Cam Nuts (H4) into Left & Right Drawer Side (P8 & P9) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Page 11
Step 13 Carefully insert the drawers into the unit by gently guiding the runners into the tracks. Step 14 You will need (P1) 4 x Wedges 4 x Wedge (H12) Screws (H13) (P5) 1 x Safety 1 x Screw Strap (H14) (H15) We strongly advise 1 x Washer...
Step 15 Wall You will need Screw 1 x Washer Phillips Head (H16) Screwdriver Screw and Wall Plug are not provided. Please use appropriate fixtures for your wall. Seek advice from a qualified trades person on how to attach this safety strap to your specific wall.