Unblocking A Upm Card - HP StorageWorks director 2/64 Installation Instructions Manual

Unblocking a UPM Card

To unblock all four ports on a director UPM card:
1. Open the ha-fabric manager application and log in. The Product View displays.
2. Double-click the director icon for which the UPM card will be unblocked. The
Hardware View displays.
3. Double-click the UPM card to be unblocked. The Port Card View for the selected
card displays.
4. Move the cursor over the UPM card to be unblocked (but not over an individual
port) and right-click the mouse to open a list of menu options.
5. Choose Unblock All Ports option. The Unblock All Ports dialog box displays, as
shown in
Figure 9: Unblock All Ports dialog box
6. Click Yes. The following occurs to indicate the UPM card is unblocked, and the
attached devices are online:
— Emulated green LEDs associated with all four ports illuminate at the Port
Card View.
— Green LEDs associated with all four ports illuminate at the director.
7. Click Back to Full View to return to the Hardware View.
8. Clear the amber system error LED on the director bezel as follows:
a. Right-click the front panel bezel graphic (away from a FRU) to open a list of
menu options.
b. Choose Clear System Error Light option.
universal port module kit installation instructions
Figure 9.
Installation Instructions
15