HID Signo 25B Install Manual

HID HID Signo Signo 25B 25B
™ ™
® ®
Biometric Reader/Controller Biometric Reader/Controller
Install Guide Install Guide
13.56 MHZ/2.4 GHz Contactless 13.56 MHZ/2.4 GHz Contactless
SRD Model: 25B SRD Model: 25B
Supplied parts Supplied parts
• HID Signo Biometric Reader/Controller 25B (1) • HID Signo Biometric Reader/Controller 25B (1)
• Installation Guide (1) • Installation Guide (1)
• Screw (1) – for attaching the reader to the backplate • Screw (1) – for attaching the reader to the backplate
Recommended parts (not supplied) Recommended parts (not supplied)
• Cable, 5-9 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden • Cable, 5-9 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden
3107A or equivalent (OSDP) 3107A or equivalent (OSDP)
• Certified LPS DC power supply • Certified LPS DC power supply
• Security tool HID 04-0001-03 (for anti-tamper screw) • Security tool HID 04-0001-03 (for anti-tamper screw)
www.hidglobal.com/PLT-04027 www.hidglobal.com/PLT-04027
• Scan the QR code or visit the link to see the multi-language electronic version of this • Scan the QR code or visit the link to see the multi-language electronic version of this
document. document.
• Lisez le code QR ou suivez le lien pour consulter la version française de ce document. • Lisez le code QR ou suivez le lien pour consulter la version française de ce document.
• Escanee el código QR o visite el vínculo para consultar la versión en Español de este • Escanee el código QR o visite el vínculo para consultar la versión en Español de este
documento. documento.
• Scannen Sie den QR-Code oder öffnen Sie den Link für die deutsche Version dieses • Scannen Sie den QR-Code oder öffnen Sie den Link für die deutsche Version dieses
Dokuments. Dokuments.
• Faça a leitura do código QR ou acesse o link da versão em português deste documento. • Faça a leitura do código QR ou acesse o link da versão em português deste documento.
• Scansiona il codice QR o visita il link della versione Italiana di questo documento. • Scansiona il codice QR o visita il link della versione Italiana di questo documento.
• Отсканируйте QR-код или пройдите по ссылке, чтобы получить версию этого • Отсканируйте QR-код или пройдите по ссылке, чтобы получить версию этого
документа на русском языке. документа на русском языке.
• 扫描 QR 码或访问此 文档的中文版本的链接。 • 扫描 QR 码或访问此 文档的中文版本的链接。
• この文書の日本語版を表示するには、 QR コードをスキャンするか、 リンクを クリ ックします。 • この文書の日本語版を表示するには、 QR コードをスキャンするか、 リンクを クリ ックします。
• QR 코드를 스캔하거나 링크를 방문하면 이 문서의 한국어 버전을 볼 수 있습니다. • QR 코드를 스캔하거나 링크를 방문하면 이 문서의 한국어 버전을 볼 수 있습니다.
1. Mount the mounting plate 1. Mount the mounting plate
ATTENTION ATTENTION
Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES
Screws not supplied. Screws not supplied.
2. Wire the 25B 2 Wire the 25B
Function Group Wire Color Function Group Wire Color
RS-485 RS-485
Pigtail wires Pigtail wires
18" (0.46m) 18" (0.46m)
Relay Relay
Inputs Inputs
(Controller (Controller
mode only) mode only)
Wiegand Port Wiegand Port
DC Power DC Power
Ethernet cable Ethernet cable
Function Group Connector Function Group Connector
18" (0.46m) 18" (0.46m)
Network Network
RS-485 = Max bus length 4,000 ft - 24 AWG (1,219 m) RS-485 = Max bus length 4,000 ft - 24 AWG (1,219 m)
1 1
Max length between nodes: 1,640 ft - 24 AWG (500m) Max length between nodes: 1,640 ft - 24 AWG (500m)
Note: Bond the ground wires of the Signo 25B power supply and the panel power supply. Note: Bond the ground wires of the Signo 25B power supply and the panel power supply.
IMPORTANT: The 19 pigtail wires should be cut to size for wall mounted application. IMPORTANT: The 19 pigtail wires and Ethernet cable may be cut for wall mounted
installation, if required. However, DO NOT cut the Ethernet cable shorter than
IMPORTANT: DO NOT cut the Ethernet cable.
6 inches (15.24 cm). If the reader is installed outdoors, the pigtails must remain
Note: Wiring the reader incorrectly may permanently damage the reader.
long enough to fit inside the mounting box to meet IP ratings.
Note: For readers with Tamper Evident Labels, inspect your reader after first unboxing. If any
Note: Wiring the reader incorrectly may permanently damage the reader.
seals are broken, please contact HID Technical Support.
Note: For readers with Tamper Evident Labels, inspect your reader after first unboxing. If any
seals are broken, please contact HID Technical Support.
Tamper evident labels (location may vary according to the reader model)
Tamper evident labels (location may vary according to the reader model)
3. Secure the 25B to the mounting plate 3. Secure the 25B to the mounting plate
1 1
2 2
1 1
3 3
4. Power and test the reader 4. Power and test the reader
5. Download and install HID Biometric Manager 5. Download and install HID Biometric Manager
https://www.hidglobal.com/signo25b https://www.hidglobal.com/signo25b
Visit Visit
Biometric Manager Installer. Once the .exe file has downloaded, Biometric Manager Installer. Once the .exe file has downloaded,
double-click the file to install HID Biometric Manager, following the double-click the file to install HID Biometric Manager, following the
on-screen prompts. on-screen prompts.
For further details, refer to the HID Signo Biometric Reader/ For further details, refer to the HID Signo Biometric Reader/
Controller 25B Administration Guide (PLT-04029), which is Controller 25B Administration Guide (PLT-04029), which is
available for download from available for download from
Function Function AWG AWG
Green Green RS-485 A RS-485 A
Tan Tan RS-485 B RS-485 B 24 24
Black Black RS-485 Ground RS-485 Ground
Gray Gray Relay – Common Relay – Common
Yellow Yellow Relay – Normally Open Relay – Normally Open
Orange Orange Relay – Normally Closed Relay – Normally Closed
Pink Pink REX Input (Supervised) REX Input (Supervised)
Gray Gray DPS Input (Supervised) DPS Input (Supervised)
Black Black Input Ground Input Ground
Green Green D0 D0
22 22
White White D1 D1
Brown Brown RED RED
Orange Orange Greeb Greeb
Yellow Yellow BUZ BUZ
Blue Blue HOLD HOLD
Violet Violet TPR TPR
Black Black Ground Ground
Red Red Power +12V Power +12V
Black Black Power Ground Power Ground
Function Function Max Length Max Length
RJ45 RJ45 328 ft (100 m) 328 ft (100 m)
Ethernet Ethernet
socket socket (CAT5/CAT5E/CAT6) (CAT5/CAT5E/CAT6)
1. Insert the reader into the backplate. 1. Insert the reader into the backplate.
2. Latch the reader. 2. Latch the reader.
3. Secure the reader to the backplate using the 3. Secure the reader to the backplate using the
supplied screw. supplied screw.
Light bar Light bar
Turn on the power. Turn on the power.
The reader should beep and the light bar should flash. The reader should beep and the light bar should flash.
Test the reader with a card. Test the reader with a card.
The reader should beep and the light bar should flash. The reader should beep and the light bar should flash.
Biometric reader Biometric reader
(requires set up in HID Biometric Manager) (requires set up in HID Biometric Manager)
and download the HID and download the HID
https://www.hidglobal.com/signo25b https://www.hidglobal.com/signo25b
Max Length Max Length
1 1
4,000 ft 4,000 ft
(1,219 m) (1,219 m)
500 ft 500 ft
(152 m) (152 m)