Table of Contents
Advertisement
• You may not modify the ROTATRAC eGFT 8000 planetary gearbox in principle.
2.6 Product and technology-dependent safety instructions
The following safety instructions apply to chapters 6 to 14.
Danger during all works on the ROTATRAC eGFT 8000 planetary gearbox during
the operation of the machine or the vehicle!
Mortal danger, risk of severe injury or damage to property during working!
Secure the entire unit against restarting.
Relieve any system pressure in the relevant part of the machine or vehicle before
you start working on the planetary gearbox.
Switch the relevant machine or vehicle part completely free of voltage before
you start working on the planetary gearbox.
Do not loosen any cable connections, connections or components on the
planetary gearbox, as long as the planetary gearbox or the machine, the vehicle
part is under oil pressure and under voltage.
Fire hazard caused by fire, smoking and naked light!
Risk of injury or damage to property from combustible materials, as for example:
Lubricating oil, preserving agent, solvent, detergents and hydraulic fluid!
In dealing with combustible materials, please observe the product data sheets
and safety data sheets of the respective manufacturer.
Do not use fire or naked light when working on the planetary gearbox, its
mounting parts and when handling with combustible materials.
Do not smoke in the vicinity of combustible materials.
Always wear the protective equipment which is specified in the safety data
sheets of the respective substance.
When the planetary gearbox is positioned near ignition sources or heat
radiators, a shield must be installed so that leaking hydraulic fluid cannot ignite
and hoses are protected against premature aging.
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG
Safety instructions
WARNING
11/64
Advertisement
Table of Contents
