6.Installation and Accessory Parts
6.1 Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the
sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses
that can be positioned on the right or the left to facilitate proper installation.
6.2 Leveling the Appliance
Once the appliance is positioned, adjust the feet (screw them in or out) to level the dishwasher. In any
case, the appliance should not be inclined more than 2¡. If the appliance is level,it will help ensure proper
6.3 Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(gas) connector and make sure that it is fastened
tightly in place (see Fig 1).
If the water pipes are new or have not been used for an extended period of time,let the water run to make
sure that the water is clear and free of impurities.If this precaution is not taken,there is a risk that the water
inlet can get blocked and damage the appliance.