Ryobi RY36BI1800A Manual page 7

ERROR MESSAGE NOTIFICATIONS
Error Message
High temperature
or
Low temperature
(when the battery pack is
installed for charging)
Incompatible battery
pack
(displays on the specific
battery pack slot)
Battery pack is low.
(displays on the specific
battery pack slot)
No battery pack in slot.
(displays on the specific
battery pack slot)
Battery fault
(displays on the specific
battery pack slot)
Overloaded
Remove load and press
reset
Overloaded
Press reset
Possible cause
The battery pack is outside
the acceptable charging
temperature range.
The installed battery pack
is not compatible with the
product.
The battery charge is low.
There is no battery pack
installed.
The battery pack is not
properly installed.
There are protection
features triggered in the
battery pack.
The communication
between the inverter and
battery pack fails during
charging.
The battery pack is
defective.
The inverter output wattage
exceeds normal operating
range.
The inverter is overloaded.
Solution
Allow the battery pack to reach the
acceptable charging temperature
range. The battery may need to
be removed from the port and
reinstalled to begin charging.
Remove the incompatible battery
pack.
For a list of compatible battery
packs, refer to the "Compatible
battery packs and power output"
section.
Recharge the battery pack.
Remove and reinstall the battery
pack.
Wait until the protection feature
is disabled or when the LCD no
longer displays error message.
Use another battery pack.
Remove the load and press the
reset button to reset the AC output.
Press the reset button to reset the
AC output.
Original Instructions
7