Battery Safety Warnings; Transportation And Storage; Maintenance; Know Your Product - Ryobi RY36BI1800A Manual

Hide thumbs Also See for RY36BI1800A:
Table of Contents

Advertisement

Do not use the product to jump-start vehicles. Doing
so could result in damage to the vehicle or its electrical
components.
The product must not be connected to other power
sources except with another power hub inverter with the
same model using the parallel kit.
The product should only be used on flat, level, stable
surfaces and should be secured when possible. Do not
pull at cords that can cause the product to tip over.
Use RYOBI 36V MAX POWER battery packs only. Do
not use battery packs from other manufacturers.
Operate the product only in temperatures between 0 °C
and 40 °C.
Remove the battery pack from the product when not in
use.

BATTERY SAFETY WARNINGS

Never smoke or allow a spark or flame near the battery
pack.
Remove personal metal items, such as rings, bracelets,
necklaces, and watches when working with a battery. A
battery can produce a short-circuit current high enough
to weld a ring or the like to metal, causing a severe burn.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion, or
risk of injury.
Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 130
°C may cause an explosion.
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the
product, battery pack, or charger in fluid or allow fluid
to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
CHARGER SAFETY WARNINGS
Follow all charging instructions, and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Do not try to charge non-rechargeable batteries with the
product.

TRANSPORTATION AND STORAGE

Turn off the product, and remove the battery pack. Allow
the product to cool down before storing or transporting.
Remove all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep the product away from
corrosive agents such as garden chemicals and de-icing
salts. Do not store the product outdoors.
For transportation in vehicles, remove the battery pack,
and secure the product against movement or falling to
prevent injury to persons or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.

MAINTENANCE

Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
To reduce the risk of electric shock, unplug the product
from the outlet before attempting any instructed
servicing.
Do not disassemble the product, take it to an authorised
service centre if repair is required. Incorrect reassembly
may result in a risk of fire or electric shock.
Turn off the product and remove the battery pack before
any cleaning or maintenance task.
After each use, clean the plastic parts with a soft, dry
cloth. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
Do not at any time, let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic, which could result in serious personal
injury.
Do not use water to clean the product.

KNOW YOUR PRODUCT

See page 9.
1. USB A charging ports
2. USB C charging ports
3. LCD panel
4. Area/warning light
5. Carry handle
6. Battery port LED
7. Battery port
8. Task light control button
9. LCD backlight control button
10. BLUETOOTH pairing / session runtime button
11. AC output/reset button
12. Main power / restart button
13. Charger
14. Parallel kit terminals
3
Original Instructions

Advertisement

Table of Contents
loading

Table of Contents