Table of Contents
Advertisement
Setup
General Information
The fire incorporates a flame effect, which can be used with or without heat, so that
the comforting effect may be enjoyed at any time of the year.
To reduce heat loss and to prevent any chimney up draft affecting the operation of
your stove fire, we recommend that the chimney flue is sealed off. A fan heater can
provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains
or other obstructions.
Always ensure that the appliance is sitting on a level surface.
Before connecting the appliance, check that the supply voltage is the same as that
stated on the appliance.
Only used filtered water in this appliance.
Once installed, never move this appliance or lay it on its back, without draining the
water from the sump and water tank. The water tank, sump, sump lid, tank cap and air
filters must be cleaned once every week, particularly in hard water areas. If you intend
on not using the appliance for longer than 1 week, drain the water from the sump and
water tank and dry the sump.
Please note: Used in an environment where background noise is very low, it may be
possible to hear a sound which is related to the operation of the fan heater & flame
effect. This is normal and should not be a cause for concern.
The sump and water tank in this product are treated with a biocidal product, being
Silver Biocide, in order to control harmful or unwanted organisms. This conforms with
the latest relevant ISO standard, Do not drink water from the sump or from the tanks.
Electrical Connection
WARNING: THIS APPLIANCE MUST BE EARTHED
This heater must be used on an AC ~ supply only and the voltage marked on the
heater must correspond to the supply voltage. Before switching on, please read the
safety warnings at the start of the instruction manual and operating instructions to
follow. Please retain this user's guide for future reference
If you settle this appliance in an existing chimney space, we recommend that;
1. You have your chimney cleaned by a competent chimney sweep.
2. You block off the chimney flue.
This procedure is important for the efficient operation of the heating unit and will also
reduce heat loss up the chimney.
Ensure that all packing items are removed (read any warning labels carefully). Retain
all packing for possible future use e.g. in the event of moving or returning the appliance
to your supplier.
7
Advertisement
Table of Contents
