Important Safety Instructions - Shark AI Ultra RV2600WDEU Instructions Manual

2-in-1 robotic vacuum cleaner
Hide thumbs Also See for AI Ultra RV2600WDEU:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
CHILDREN OR ANIMALS SHOULD NOT BE LEFT UNATTENDED IN ANY ROOMS
THAT THE ROBOTIC VACUUM HAS ACCESS TO DURING CLEANING.
LASER WARNING
THIS PRODUCT HAS A CLASS 1 LASER. ALWAYS TURN OFF THE POWER BEFORE LIFTING THE ROBOTIC
VACUUM CLEANER OR PERFORMING ANY MAINTENANCE ON IT. DO NOT LOOK DIRECTLY INTO LASER.
IF THE CHARGING CABLE PLUG DOES NOT FIT FULLY INTO THE SOCKET, CONTACT A QUALIFIED
ELECTRICIAN. DO NOT FORCE INTO SOCKET OR TRY TO MODIFY TO FIT.
GENERAL WARNINGS
When using an electrical appliance, basic
precautions should always be followed, including
the following:
1.
This appliance consists of a Wet/Dry Robot
Floor Cleaner vacuum and charging dock with
power supply. These components contain
electrical connections, electrical wiring, and
moving parts that potentially present risk to the
user.
2.
Before each use, carefully inspect all parts for
any damage. If a part is damaged, discontinue
use.
3.
Use only identical replacement parts. See
replacement accessories page of this booklet.
4. This Wet/Dry Robot Floor Cleaner contains no
serviceable parts.
5.
Use only as described in this manual. DO NOT
use Wet/Dry Robot Floor Cleaner for any
purpose other than those described in this
manual.
6. With exception of filters, dust cups and pads,
DO NOT expose any parts of the Wet/ Dry
Robot Floor Cleaner to water or other liquids.
7.
DO NOT put hands into any opening in the
dock or robot.
USE WARNINGS
8.
This product has a Class 1 Laser. Always turn
off the power before lifting the robotic vacuum
cleaner or performing any maintenance on it.
9.
DO NOT look directly into laser.
10. Always turn off the robotic vacuum cleaner
before inserting or removing the filter, dustbin,
or fluid reservoir.
11. DO NOT handle plug, charging dock, charging
cable, or Wet/Dry Robot Floor Cleaner with wet
hands. Cleaning and user maintenance must not
be done by children without supervision
12. Children should NOT play with the appliance.
13. This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory, or mental capabilities
or lack of experience and knowledge if they
sha rkcl e a n.eu
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
14. DO NOT use the robot without the dustbin,
filter, and fluid reservoir in place.
15. DO NOT damage the charging cord:
a) DO NOT pull or carry charging dock by the
cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord. Grasp
the plug, not the cord.
c) DO NOT close a door on the cord, pull the
cord around sharp corners, or leave the cord
near heated surfaces.
d) The supply cord cannot be replaced. If the
cord is damaged the appliance should be
scrapped.
16. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with any
opening blocked; keep free of dust, lint, hair,
and anything that may reduce airflow.
17. DO NOT use if Wet/Dry Robot Floor Cleaner
airflow is restricted. If the air paths become
blocked, turn the vacuum cleaner off and
remove all obstructions before turning on the
unit again.
18. Keep nozzle and all vacuum openings away
from hair, face, fingers, uncovered feet, or
loose clothing.
19. DO NOT use if Wet/Dry Robot Floor Cleaner is
not working as it should, or has been dropped,
damaged, left outdoors, or dropped into water.
20. DO NOT place vacuum cleaner on unstable
surfaces.
21. DO NOT use to pick up:
a) Liquids.
b) Large objects.
c) Hard or sharp objects (glass, nails, screws, or
coins).
d) Large quantities of dust (drywall dust,
fireplace ash, or embers.)
e) DO NOT use as an attachment to power
tools for dust collection.
f) Smoking or burning objects (hot coals,
cigarette butts, or matches).
g) Flammable or combustible materials (lighter
fluid, petrol, or kerosene).
h) Toxic materials (chlorine bleach, ammonia,
or drain cleaner).
i) Toxic materials (high concentrations of
chlorine bleach liquid, high concentrations of
ammonia, or drain cleaning solution).
22. DO NOT use in the following areas:
a) Outdoor areas near fireplaces with
unobstructed entrances
b) Spaces that are enclosed and may contain
explosive or toxic fumes or vapors (lighter
fluid, petrol, kerosene, paint, paint thinners,
mothproofing substances, or flammable dust
c) In an area with a space heater
d) Near fireplaces with unobstructed
entrances.
23. Turn off the Wet/Dry Robot Floor Cleaner
before any adjustment, cleaning, maintenance
or troubleshooting. Note: in the OFF (O)
position, the robot still uses a small amount of
power.
24. Allow all filters to air-dry completely before
reinstalling them to prevent liquid from being
drawn into electric parts.
25. DO NOT modify or attempt to repair the
robotic vacuum cleaner or the battery yourself,
except as indicated in this Owner's Guide. DO
NOT use the vacuum if it has been modified or
damaged.
26. Remove all spilled or leaked liquid from the
dock landing mat, base or floor, as it could lead
to risk of electrical shock.
27. When refilling the reservoir, check for leaks,
as pooled liquids are a slipping hazard and
may cause electrical shock. If the reservoir is
damaged, it must be replaced.
28. Use caution walking on mopped floors, as they
may be slippery while damp.
29. DO NOT use any household cleaners (all-
purpose cleaners, glass cleaners, bleach) on
any of the polished high gloss surfaces on the
docking station or robot vacuum cleaner as
they contain chemicals that may damage these
surfaces. Instead use a cloth dampened with
water to gently clean.
30. To minimise the risk of the robot traveling
beyond an unsafe boundary (stair or cliff
edges, fireplaces, water hazards), establish
these areas as no-go zones using the mapping
feature in the SharkClean mobile app. Upon
setting the boundary, run the vacuum and
visually confirm that the settings effectively
prevent the robot from passing beyond the set
boundary. Adjust settings as necessary. For
nonapp users, use a boundary to block off an
unsafe boundary.
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE
SharkClean.co.uk/EULA
SAVE THESE INSTRUCTIONS
For the latest warnings and cautions, go to www.sharkclean.eu/robothelp
BATTERY USE
31. The battery is the power source for the
vacuum. Carefully read and follow all charging
instructions.
32. To prevent unintentional starting, ensure the
vacuum is powered off before picking it up or
carrying it. DO NOT carry the appliance with
your finger on the power switch.
33. Use ONLY the Shark® charging dock
XDKRV2600WFEU and use only battery
RVBAT850A. Use of batteries or battery
chargers other than those indicated may create
a risk of fire.
34. Keep the battery away from all metal objects
such as paper clips, coins, keys, nails, or
screws. Shorting the battery terminals together
increases the risk of fire or burns.
35. Under abusive conditions, liquids may be
ejected from the battery. Avoid contact with
this liquid, as it may cause irritation or burns.
If contact occurs, flush with water. If liquid
contacts eyes, seek medical help.
36. Robotic vacuum cleaner should not be stored,
charged, or used at temperatures below
50°F (10°C) or above 104°F (40°C). Ensure
the battery and vacuum have reached room
temperature before charging or use. Exposing
the robot or battery to temperatures outside
of this range may damage the battery and
increase the risk of fire.
37. DO NOT expose the Wet/Dry Robot Floor
Cleaner or battery to fire or temperatures
above 130°C (265°F) as it may cause explosion.
NO-GO ZONES AND BOTBOUNDARY STRIPS
38 DO NOT put BotBoundary strips underneath
carpet or rugs.
39. DO NOT place BotBoundary strips on top of
one another.
40. Always use no-go zones or Bot-Boundary
strips around reflective flooring and surfaces.
41. No-go zones or BotBoundary strips should
always be used near carpeted stairs.
42. DO NOT use no-go zones or Bot-Boundary
strips strips within 3 metres of the dock.
43. For your robot's cliff sensors to work properly,
all runners, rugs, carpets, or small thresholds
(like child gates) must be 20 centimetres from
any stairs (or must be continuous and extend
over the edge of the stairs). If a runner, rug,
carpet, or small threshold that is less than 20
centimetres from the stairs cannot be moved,
you must use a no-go zone or a BotBoundary
strip to block off the stairs.
s ha rkc lea n.eu

Advertisement

Table of Contents
loading

Table of Contents