Shark AI Ultra RV2502AE Setup

STEP 1
PREP THE ROBOT
.......... Side Brushes ..........
• Remove protective film from robot and base.
• Attach the side brushes to the posts on the
bottom of the robot.
STEP 3
CHARGING YOUR ROBOT
6
h
First
Charge
INDICATOR
• Place robot on base to charge for 6 hours.
• When the robot is properly aligned with its BACK
against the base, the Charging Icon
top right side of the base will illuminate and the
Battery icon on the robot will illuminate.
• Make sure the robot is properly aligned on the base.
• TO TURN ON ROBOT: Place robot on base or
press and hold the CLEAN button for 5 to 7
seconds until the indicator lights turn on.
SETUP
STEP 2
• Find a permanent location for the base in a central
area with a strong Wi-Fi signal.
• Remove any objects that are closer than 3 ft.
from either side of the base, or closer than 5 ft.
from the front.
• Plug in the base. The Base Power Indicator Icon
on the top right side of the base will illuminate when
the base has power. Make sure the power switch on
the back of the base is in the (I) ON position.
STEP 4
• Before cleaning, clear cords and remove small
obstacles like clothing or toys that are less than
3.5" tall.
on the
• Open interior doors in rooms you want your robot
to clean.
STEP 5
App Features
UltraClean Mode™
✔
Spot Cleaning
✔
Scheduling
✔
No-Go Zones
✔
Room Select
✔
NOTE: For more information on connecting your robot, see
SET UP THE SELF-EMPTY BASE
3 ft.
3 ft.
5 ft.
PREP YOUR HOME
DOWNLOAD THE SHARKCLEAN APP
TO UNLOCK YOUR BEST CLEAN
back page.
Place
base on
bare floor
against the
wall.